MP-32 Parts

Cooks

Standard Roller Guides

The Cook's roller guides are case hardened and precision ground for long life and smooth running. Comes with greasable bearings when used together with the Cook's guide system or Cook's zerk bolt. Fits most Woodmizer sawmills. Roller guides come complete...

MP32 Basic Maintenance Kit

Kit includes: 2 - 1-1/4" roller guides with bushings 2 - Standard Zerk Bolts 4 - Track Scrapers 1 - 6" piece of Felt for Drip System

Jameco

New Forward / Reverse Speed Control Potentiometer and Knob

Replacement potentiometer that controls the head forward / reverse travel on the MP-32 sawmill. For MP-32 sawmills built after July 2022 Item #4 in the diagram.

Cooks

1-1/4" Roller Guide

Complete replacement roller guide with bearings for 1-1/4" wide blades Works for 1-1/4" wide blades. This is for one roller guide. 

Cooks

Scale Pointer for 2012-Newer

Replacement scale pointer for HD-32 and MP-32 sawmills 2012 and newer

Carling

Push Switch for Forward or Reverse

Switch for either the head forward and/or reverse on the MP-32 12 volt system. *Requires one for the forward and one for the reverse function. Item #10 in the diagram.

Jameco

Knob for Potentiometer

Knob for Potentiometer Item #5 in the diagram

Jameco

Forward / Reverse Speed Control Potentiometer

Replacement potentiometer that controls the head forward / reverse travel on the MP-32 sawmill. Item #4 in the diagram.

Common Good

Bearing for Idle Band Wheel

Replacement bearing for MP-32 sawmill idle band wheel. Fits MP-32 models 2001 and up.

Common Good

Felt for Drip System

6" replacement felt for the MP-32 and AC-36 drip systems

Cooks

V-Track Roller for MP-32

Replacement V-track roller for the MP-32 sawmill.

Gates

MP-32 Head Brake Belt

Head up and down brake belt. Part #3 in the diagram pictured.

Gates

MP-32 Main Drive Belt

Main drive belt for engaging and disengaging the blade on the Cooks MP-32 sawmill

Common Good

Door Latch

Rubber door latch.

G&G

MP-32 idler pulley

Idler pulley for engaging and disengaging the blade on the MP-32.

Cooks

Bearings for Standard Roller Guides (2pcs.)

Replacement greasable bearings for all standard roller guides. Qty. - 2pcs. I.D. - 1/2"

Cooks

Track Scraper

Use in front of v-track roller to clear debris from 1" angle iron rails. Made from wear resistant UHMW 1-3/4" wide 4" tall 3/16" thick

Cooks

Roller Guide Bushing

Replacement roller guide bushing for standard guides