25" Band Wheel Sawmill Head DIY Kit

If you're looking to get better performance from your current sawmill or you plan on building your own, we have a kit complete with the core componenets to help you get that done.

This kit includes:

2  -  25" band wheels(1 Drive and 1 Idle)

2  -  Complete Standard Retrofits

2  -  Complete Super Drip Systems

1  -  Drive Bearing Assembly

1  -  Idle Shaft

- The Cooks band wheels are ground true with the crown ground into the face of the wheel for correct blade tracking.

25" Band wheels can be used to run 1", 1-1/4", 1-1/2" and 2" Blade sizes.

- The Retrofits have 8 areas of adjustment for your roller guide so fine tuning is a snap. The guide itself measures 2”o.d. and is case hardened and contains two greasable bearings for long running life.

- Blade lubrication is a must in any sawmilling application. This universal blade lubrication system can be added to most any sawmill.

This system allows for a metered amount of lubricant (we recommend one drip per second) to soak into the felt as the felt wipes against the blade applying the lubricant.

Lubricants are expensive and since this system doesn't simply pour or spray lubricant constantly, it will quickly pay for itself.

• Lubricates blade with a felt block
• Uses less lubricant than any drip or spray system
• Weld or bolt in place
• Includes drip line, hose clamps, ball valve, sight drip valve, felt, and felt holder
• We recommend one on the incoming and outgoing sides of the log

This heavy duty Drive Bearing Assembly is designed to mount your blade drive wheel and pulley.

Using stressproof shaft and Timken tapered bearings this unit far superior to any pillow block style setup.

For wheels up to 26"

• Overall shaft length: 12-1/4"
• Center to center front to back on the feet - 3-1/2"
• Center to center side to side on the feet - 5"
• Band wheel side, shaft size - 2-1/8"
• Drive pulley side, shaft size - 1-7/8"
• Band wheel shaft, length - 3-3/4"
• Drive pulley side, shaft length - 2-3/4"

The Idle Shaft is the perfect solution for mounting an idle band wheel on your sawmill or resaw.

Best for idle wheels up to 26"

• Precision CNC machined cold roll shaft
• Overall length - 9-1/4"
• Overall width - 7"
• Bolt hole center to center, side to side - 5"
• Bolt hole center to center, front to back - 3-1/2"
• Shaft length - 2"
• Shaft diameter - for use with 5209 bearing (45mm i.d.)
• Comes with spanner nut and washer