LOOKING FOR USED? Check out used sawmill equipment for sale

Planning for 2026? Section 179 may apply to sawmill equipment purchased this year. Talk with Robert before we’re closed for the holidays: Closed Dec 24–26 & Dec 31–Jan 2.
$244.70 - $273.00
Share

1-1/4" blades for Woodmizer HR150 and HR250 resaws

Add to Cart

Options

$244.70 - $273.00
Or

Info

Info

MPN:
CS00116

Description

Box of 10 1-1/4" blades for Woodmizer HR150 and HR250 resaws. Each blade measures 168 inches long x 1-1/4 inches wide to keep cuts straight and surfaces clean.

Need a fast recommendation? Call our team at 1-800-473-4804. We’ll match the profile to your material, line speed, and finish goals.

  • Exact Fit: HR150/HR250 resaws (168" x 1-1/4").
  • Built to Last: Heat-treated bodies with consistent set for long service life.
  • Clean Finish: Profiles tuned for true tracking and reduced washboarding.
  • Profiles Offered: 1-1/4 x .042 x 7/8 Ultra 10â„¢ & 1-1/4 x .042 x 7/8 Super Sharp DuraToothâ„¢.

Bandsaw Blade Sizes

  • 1-1/2 x .050 x 7/8 Super Sharp DuraToothâ„¢ — Aggressive 8° hook angle for fast, precise resawing.
  • 1-1/2 x .050 x 1 Super Sharp DuraToothâ„¢ — Wider tooth spacing supports higher feed rates for production lines.
  • 1-1/2 x .055 x 1 Super Sharp Magnumâ„¢ DuraTooth — Extra-stiff .055 body for demanding resaw applications and dense stock.

Resawing Tips

  • Match tooth spacing to board width and feed rate for the best finish.
  • Keep blades sharp and properly set to reduce washboarding and wavy cuts.
  • Maintain proper tension and guide alignment per machine specs for straight tracking.

Remember to keep those blades sharp: Cooks sharpener + dual tooth setter combo. Or use our professional resharp service to keep blades running at peak performance.

FAQ

➤ Will these fit the Wood-Mizer HR150 and HR250?

Yes. These blades are 168" long x 1-1/2" wide, the correct size for the HR150 and HR250 resaws. Choose your preferred tooth profile above.

➤ Which blade type should I start with?

For general purpose resawing, start with Super Sharp DuraToothâ„¢ .050. For maximum rigidity in tough or wide stock, step up to Super Sharp Magnumâ„¢ .055.

➤ How do I maximize blade life?

Run proper tension, keep guides aligned, avoid dirty material, and resharpen/reset regularly. Pairing your resaw with the Cooks sharpener + setter combo is the best way to extend blade life.

Questions? Need help choosing the right resaw blade?
Call us at 1-800-473-4804. We’ll help you match the blade to your material and line speed.

Related Products