Show Filters

Cook's All Metal Band Wheels

If you have excessive blade breakage, or head carriage vibration, then chances are you have out of round band wheels.


Since taper lock bushings themselves are not perfectly true (can be .015” out of round) we turn the band wheels and taper lock bushing as one unit and stamp the location so that you get a true band wheel.  You can take a true band wheel and match it up with a bushing and then you have a out of round band wheel again, so it is a must to turn these as one unit.

We go through an unmatched process in the industry to guarantee you get true running band wheels. 
Replace your loose belt fitted wheels with a superior running band wheel that will eliminate your vibration and increase your blade life.

Band Wheels

Sort By
  • 19" band wheel for portable sawmill and resaw bandsaw blades

    19" Metal Band Wheels

    The Cooks band wheels are ground true with the crown ground into the face of the wheel for correct blade tracking. 19" Band wheels can be used to run 1" or 1-1/4" * Specify what blade width you will be running *The idle wheel comes with a double...

    $395.00
    Choose Options
  • Drive bearing assembly

    Drive Bearing Assembly

    This heavy duty Drive Bearing Assembly is designed to mount your blade drive wheel and pulley. Using stressproof shaft and Timken tapered bearings this unit far superior to any pillow block style setup. For wheels up to 26" Overall shaft length:...

    $1,223.00
    Add to Cart Buy Now
  • Mega drive bearing assembly

    Mega Drive Bearing Assembly

    This massive piece is designed to last. Constructed of 6" round steel housed with Timken roller bearings and stressproof shaft, it is build to withstand heavy loads.  This unit can handle band wheels up to 36" in diameter. Overall length -...

    $1,465.00
    Add to Cart Buy Now
  • Mega Idle Shaft

    Mega Idle Shaft

    Perfect solution for mounting an idle band wheel on your sawmill or resaw. Good for idle wheels up to 36" Precision CNC machined cold roll shaft Overall length - 9-1/4" Overall width - 7" Bolt hole center to center, side to side - 5" Bolt hole...

    $175.00
    Add to Cart Buy Now
  • Idle shaft

    Standard Idle Shaft

    Perfect solution for mounting an idle band wheel on your sawmill or resaw. Best for idle wheels up to 26" Precision CNC machined cold roll shaft Overall length - 9-1/4" Overall width - 7" Bolt hole center to center, side to side - 5" Bolt hole...

    $165.00
    Add to Cart Buy Now
  • 25" Drive wheel

    25" Metal Band Wheels

    The Cooks band wheels are ground true with the crown ground into the face of the wheel for correct blade tracking. 25" Band wheels can be used to run 1", 1-1/4", 1-1/2" and 2" Blade sizes * Specify what blade width you will be running *The idle wheel...

    $495.00
    Choose Options
  • 26" Band wheel for portable sawmills and resaws

    26" Metal Band Wheels

    The Cooks band wheels are ground true with the crown ground into the face of the wheel for correct blade tracking. 26" Band wheels can be used to run 1", 1-1/4", 1-1/2" and 2" Blade sizes * Specify what blade width you will be running *The idle wheel...

    $525.00
    Choose Options
  • 30" Band wheel

    30" Metal Band Wheels

    The Cooks band wheels are ground true with the crown ground into the face of the wheel for correct blade tracking. 30" Band wheels can be used to run 1", 1-1/4", 1-1/2" and 2" Blade sizes * Specify what blade width you will be running *The idle wheel...

    $649.00
    Choose Options